Fliesen

For the 40mm High Impact Tile, vacuum regularly and mop with warm water and a neutral-pH cleaner. Avoid solvent-based cleaners and machine cleaning. Cleaning requirements can differ between flooring surfaces, so use the care instructions for the exact tile selected, and see our guide on how to clean rubber gym tiles.

Choose thickness from the training impact. Thinner tiles suit general gym use, while heavier free-weight and lifting areas need more protection and acoustic performance. The 40mm High Impact Tile, the thickest tile in the range, lists 61% shock absorption and 24dB sound reduction on its product page.

Measure the net floor area in square metres, then divide by the coverage of the selected tile and add an allowance for cuts and waste. For layouts with walls, pillars or irregular edges, use the final floorplan rather than room length x width alone; the High Impact Tile calculator recommends at least 10% extra.

It may be possible, but check that the existing floor is level, sound, dry and suitable for the selected fixing method. Heavy-duty flooring can only perform properly if the subfloor can support it and the edges or transitions are planned to avoid movement and trip points.

It depends on the tile. The 40mm High Impact Tile can use connectors, with five recommended per tile, and the 30mm High Impact Tile seven, or tiles can be professionally bonded to a prepared subfloor. Threshold ramps and transition strips may also be needed where the tile meets a lower floor surface.

Sale format is product-specific. Check whether the price is per tile, pack or square metre and use the tile dimensions to calculate actual coverage; for example, the black 40mm High Impact Tile is priced and sold per square metre. Do not infer the number of physical tiles from the collection price alone.

Plan full tiles through the main training area first, then place cuts against walls, pillars and edges where possible. Include at least the recommended waste allowance and keep the final row wide enough to remain stable rather than creating narrow slivers around the perimeter.

Match the ramp or transition strip to the tile thickness. For example, the Challenger transition strip is 20mm high and is intended for a 20mm flooring transition, while the High Impact Gym Tile Transition Strip is 40mm high, so do not use a 20mm edge piece against a 40mm tile without a designed level change.

Replacement is possible where the same tile remains available, but colour and production batches can vary over time. The current Challenger Gym Tile is not compatible with Challenger tiles bought before April 2026, so check compatibility before extending an existing floor. Keep the exact product name, thickness and colour specification, and consider retaining spare tiles from the original installation for high-wear areas.

Place heavy racks and machines on flooring that is specified for the expected static and impact loads, and follow the equipment anchoring instructions through or around the flooring where required. Do not rely on the tile itself as an anchoring substrate.

Tile weight and shipping depend on the product and quantity; for example, the 15mm Anti-Slip Gym Tile weighs 15kg and the 30mm High Impact Tile 12kg. Expect larger flooring orders to arrive as a heavy palletised consignment, and plan delivery access and manual handling before installation day.

Calculate the complete square-metre cost from the tiles plus the specific connectors or adhesive, transition pieces, waste allowance, delivery and any professional installation or subfloor preparation. The displayed tile price alone is not the complete installed-floor cost.

The right flooring enhances safety by:

• Providing a stable, non-slip surface to reduce injury risk.
• Absorbing impact to protect joints and muscles during training.
• Shielding equipment and subfloors from heavy weight drops.